|
|
Degradation of Photovoltaic Modules
Poledník, Tomáš ; Křivík, Petr (referee) ; Vaněk, Jiří (advisor)
The bachelor diploma thesis is focused on the constructional technology of the solar modules as well as on the problems of the induced degradation under the influence of the potential. It specifies the key issues and possible elements that influence the effect of environment with regard to possible causes of the origin of degeneration. The thesis includes the description of measuring of the polycrystalline and monocrystalline technologies that are resistant to the leading potential. Furthemore, the measuring was carried out on the chosen testing pieces that had been affected by the degradation of the output
|
|
|
Bus wiring systems for complex building management
Mokrý, Lukáš ; Macháček, Jan (referee) ; Bátora, Branislav (advisor)
The aim of my thesis is to examine current opportunities of bus wiring systems for complex building management, mainly its power and economic evaluation. It can be simply called intelligent electrical installation. I will examine two systems from INELS and ABB company. These systems contain functional components, mainly modules and controllers. By means of other materials, I’ll create a panel. Components will be placed there and electrically connected. After this, systems will be put into operation and programmed by means of their software. The next step is measuring of quatities during the various conditions of systems and consumption, which is one of the main aims of the thesis. Two apparatuses will be used for measuring. This thesis itself will contain theoretical analysis of systems, their description, using the way of operation and main advantages and disadvantages. Single components and complete process of measuring and working in laboratory will be described. An overall evaluation and comparison of the systems from various points of view, including the price, will be put together from results.
|
|
|
Commercial building with flats
Kubát, Pavel ; Gintar, Jan (referee) ; Kacálek, Petr (advisor)
This thesis solves the new building of commercial building with flats in vacant space in Prague street in Hořovice. This building is with the cellar in a part of object and it has four floors. Commercial building has rectangular ground plan and it is covered with flat roof. The facade will be furnished with contact thermally insulated system with improved plaster and cladding tape. The object is proposed to be made with brick from block. Ceiling is made from iron-concrete ceiling panels. In the basement there are cellar boxes for the each apartments, store room and boiler room. In the ground floor there are four shops which are directly approachable from the outside. Every shops have own store room, office and restroom. There are also situated pram room for apartments and two stores for household rubbish. The first floor is constructed for offices where two companies can be located. In the second floor there are six apartments. Two of them can be adapted for the person with reduced mobility. The third floor is identical with the second floor.
|
|
|
FPGA application in LED matrix display controlling
Šunka, Pavel ; Bohrn, Marek (referee) ; Fujcik, Lukáš (advisor)
The thesis gives an overview of the issue of control of full-color RGB LED panels with a large number of rows and columns. It deals with communication protocols for image transfer and information exchange. It focuses on implementing the FPGA into the RGB LED control structure. In the first half, the thesis focuses on deepening the theoretical knowledge about LED technologies, their control and color display. It further solves communication with superior elements. The last part of the theory is dedicated to FPGA circuits. The second part of the thesis describes the practical design of the FPGA circuit from UART and SPI communication through data storage from the communication to the panel control itself.
|
|
|
Panel meassurement device
Vaško, Pavel ; Kaczmarczyk, Václav (referee) ; Bradáč, Zdeněk (advisor)
The master thesis includes a literature search, which is focused on questions around panel measure instruments for measuring analog voltage signals. There is the block diagram and the concept of measuring voltage values designed from collected information and defined requirements to the device. In the next step a design of the circuit diagram is created and published and consequently transferred into PCB. The whole board has been fabricated, assembled and tested. The firmware development starts with the definition of basic functional blocks for using of internal elements of the device, which is followed by the implementation of the Modbus slave station service routine. The top part presents graphical user interface on the device.
|
|
| |
|
|
TOWNHOUSE ON THE WATERFRONT IN PŘEROV
Dvořáková, Kateřina ; Hoffmann, David (referee) ; Kratochvíl, Jan (advisor)
Our development area comprises the corner part of building block delimited by streets Brabansko – Malá Dlážka on parcels No. 4382, 4379, 4378, 4380. The place is divided by the river Bečva and by the waterfront road from the historic town centre. Multifunctional building includes public service and housing. The front entry is from the riverside street Brabansko, parking and supply place on the courtyard open to the street Malá Dlážka. First 3 floors serves as a commercial lease place, which can be free divided due to used space structure. 3th – 5th floor are destined for flats 2+kitchen and 3kitchen, 6th – 9th floor flats 4+kitchen. Urbanistic situation: fractionalism of sporadic building, breach of the street lines, absence of the regulative plan, specificity of waterfront. Space solution: Main feature: calm space with pedestrian, the river – impression – change of mood all day, water reflex, the south sun There are two differential points of view: over the river: sensation context of 2 adjoining building – linearity, pacific mass; close view – expression variety of surrounding allows more creative concept. The mass is connected to adjoining building and grows up. The form is inspired by ship, the corner symbolizes keel. The corner tower was cut in 2 directions, cuts are not so expressive over the river, it is apparent from side and close view. The cut features fallacy - disturbance of the vertical lines turns beholder´s head, it seems to be thinner than the prism. Open corner gives view angle from the rear street and there is a entry place with entry to the grand floor, to stairs to 1st and 2nd floor and through the passage way to car lifts and central stairs leading from basement garage through all the residential tower. There is used attractive views – terrace in 2nd floor for offices and large glass surfaces in flats. The facade raster against river matches scale of adjoining building, raster of cut surfaces is denser. It is the second fallacy – softer scale, so the surface seems to be deeper from the front view. Color solution result from water reflex, there are 3 materials of the diverse reflection intensity: glass, safety enamel dark grey glass and aluminum siding of blue metallic reflex. So there are various surface features all day. There is replaced dark glass surfaces by photovoltaic panels in the various solution. The construction combines concrete frame and wall system, both monolithic steel concrete, the basement is from rigid water-proof concrete construction, which results water and earth pressure. Yard facade is plaster and lightweight facade systems on front face – steel jambs clipped on steel concrete flooring plate. Parking for non-residential spaces is provided by vertical independent car lift for 2 cars and 2 standing for disabled, 36 places in sum. 14 parking standing is in the basement for residential, enterable from yard lift.
|
|
|
Sports and cultural centre, Otradov
Myška, Jan ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The subject of this diploma thesis is the preparation of project documentation for the implementation of new sports and cultural centre Otradov. The dominant feature of the complex objects stands and multipurpose hall. The building is architecturally designed with an effort to fit in too much of rural architecture. Multipurpose hall has two floors, one third roofed flat roof, two-thirds of the roof ridge. The core system is aerated concrete blocks. The building is two-storey grandstand with the carrier deck. Roofing is solved by means of broken wooden beams. Sanitary facilities is dealt wall system and roofed shed roof. Athletics track, the surface of the polyurethane mixture designed for sports.
|
|
| |
|
| |
guest ::
